CASA 1212-W PT Water-Based Contact Adhesive
CASA 1212W PT is a non-flammable, water-based contact adhesive for bonding plastic laminate, FRP panels, gypsum board and tack board to particle board, plywood, metal and gypsum board.
- Short open time
- Zero VOC
- High solids with greater coverage than solvent adhesives
- Excellent water resistance
- Natural opaque color
Surfaces must be clean and dry. Spray an even coat of adhesive to both surfaces to be bonded. Allow both to become dry before bonding. Drying time will vary depending on atmospheric conditions such a temperature and humidity, as well as the amount of adhesive applied. Place both surfaces to be bonded in exact position desired. CASA 1212W-PT bonds immediately and cannot be repositioned. If the two surfaces do not grab immediately when brought into contact they have become dirty or dried too long. Apply another thin coat of adhesive, let dry and re-adhere the surfaces. Press from the center outward in all directions use a 3” to 6” roller to secure the bond. Wet adhesive may be cleaned up with CASA Quick Clean 6. The spray gun and hose should be cleaned with CASA PT Cleaner after use.
- No. 38 pressurized canister